Standard — makes up to 15 gallons/day; a green/red light shows water quality; works on 120 V and 30–125 PSI; about 25″×32″.
Both include: an easy-fill spigot, a design that’s simple to disinfect, a monitor for water quality, and on-demand supply—no more lugging jugs. They also reduce biofilm and keep removing contaminants each time water passes through.
Ready for sterilizers: Supports AAMI ST:108 water quality.
Protects tools: Less scale and corrosion; fewer breakdowns.
Simple setup: Wall-mounted system replaces bottled/distilled water and makes water on demand
Lower cost: Costs less per gallon than bottled water; no more carrying jugs.
Water first passes carbon/KDF to fight scale and remove organics, then an RO membrane to cut dissolved solids, then three DI stages that polish water, and finally a charged membrane that blocks bacteria and viruses.
The Plus keeps water moving through the final micro filter and the tank. The tank has an internal spray ball and an air vent to help keep outside contaminants out. A float tells the controller when to add fresh water. The control panel’s digital monitor and enclosed pump help limit bacteria growth.
Change the carbon/KDF, RO, and final bacteria/virus filter about every 6 months. Replace DI cartridges as needed based on use and water quality.