“Scale, corrosion, sediment controls, and system cleaning are critical and disinfectant residual should be adjusted by an automated system”
“The most common cause of overheating and failure of boiler tubes is the formation of hard scale.”
“Removing biofilm could decrease energy costs by 30%. Do you have the right chemicals for your system?”
“The bane of cooling towers is suspended solids which concentrate in direct proportion to the cycles of concentration.”
Irving is home to a diverse industrial base that includes corporate headquarters (exxonmobil, kimberly-clark, vistra energy), telecommunications, logistics, and airport services. Each of these sectors depends on reliable water systems — cooling towers, boilers, closed-loop systems, and process water — that perform efficiently and comply with environmental regulations. Without professional water treatment, these systems face accelerated scale buildup, corrosion, microbiological fouling, and premature equipment failure.
The local water supply in Irving is sourced from surface (dfw regional blend via dallas water utilities), which produces water with moderate (80-140 ppm) hardness levels. While this water is generally manageable, seasonal fluctuations in source water blending can create unexpected treatment challenges. Facilities that rely on a static chemical program without regular monitoring and adjustment are vulnerable to upsets during these transition periods.
Irving falls under TCEQ Region 4 (Dallas/Fort Worth), which oversees environmental permitting and compliance across the region. Region 4 administers environmental compliance in the Irving area. The Las Colinas business district and DFW Airport proximity create concentrated demand for commercial water treatment services. Facilities with cooling tower blowdown discharge or process water waste streams must ensure compliance with applicable TPDES permits and local pretreatment ordinances. EnviroTech’s water treatment programs are designed to minimize blowdown volume and ensure discharge water quality meets all applicable limits.
EnviroTech’s Irving service team delivers the full range of water treatment services to commercial and industrial facilities across Dallas County and the surrounding area. Every program is designed by Certified Water Technologists and supported by local service technicians who know the specific water chemistry and regulatory landscape of the Irving region.
Our water treatment process is built around understanding your specific facility before prescribing solutions:
Q: How much does industrial water treatment cost in Irving, Texas?
Industrial water treatment costs in Irving typically range from $500 to $5,000 per month depending on system size, water chemistry, and treatment complexity. Facilities with multiple cooling towers or high-hardness source water from surface (dfw regional blend via dallas water utilities) generally fall on the higher end of that range. EnviroTech provides a free initial assessment to scope your specific needs and provide transparent pricing.
Q: What are the water hardness levels in Irving?
Irving’s water supply from surface (dfw regional blend via dallas water utilities) typically produces moderate (80-140 ppm) hardness levels. This hardness is primarily composed of calcium and magnesium carbonates, which create scaling potential in cooling towers, boilers, and heat exchangers. The exact hardness varies seasonally based on reservoir levels and source water blending. EnviroTech monitors these changes and adjusts treatment programs accordingly.
Q: How often should cooling tower water be tested in Irving?
Cooling towers in Irving should be tested at minimum weekly for basic parameters (conductivity, pH, biocide residual) and monthly for comprehensive analysis (hardness, alkalinity, silica, iron, bacteria). Given the warm Texas climate, which accelerates biological growth, more frequent testing may be warranted during summer months. EnviroTech’s service program includes all routine testing.
Q: What industries in Irving need water treatment?
The Irving area’s key industries — including corporate headquarters (exxonmobil, kimberly-clark, vistra energy), telecommunications, logistics, and airport services — all generate demand for professional water treatment services. Any facility operating a cooling tower, steam boiler, closed-loop HVAC system, or process water system benefits from professional water management. Healthcare facilities, data centers, and food processing plants have especially critical water quality requirements.
Q: Which TCEQ region covers Irving, TX?
Irving is covered by TCEQ Region 4 (Dallas/Fort Worth). Region 4 administers environmental compliance in the Irving area. The Las Colinas business district and DFW Airport proximity create concentrated demand for commercial water treatment services. EnviroTech maintains working relationships with regional TCEQ staff and can assist with permit compliance, discharge reporting, and regulatory communications for your Irving facility.
EnviroTech provides water treatment services throughout Dallas County and the surrounding area. In addition to Irving, our Fort Worth service team serves facilities in nearby communities including:
Dallas · Fort Worth · Arlington · Grand Prairie · Carrollton · Lewisville · Euless · Grapevine
Whether you need a new treatment program, a second opinion on your current provider, or emergency support for an upset condition, EnviroTech’s Irving service team is ready to help.
7620 Flagstone St, Fort Worth, TX 76118, USA
(574) 254-0275
F: 330-425-8202
sales@getchemready.com
