Free sample testing finds the right flocculant or coagulant for your process — so you stop overdosing, reduce sludge, and hit discharge limits consistently.
How it works: Send us a water sample or we'll collect on-site. Our lab runs jar tests across anionic, cationic, and polymer chemistries to find what works best for your water — then we build the treatment program around it.
Most facilities pick a flocculant based on what the last supplier recommended — then live with the consequences. Your influent chemistry, pH, TSS load, and metals profile are unique to your operation. Generic chemistry can't account for that.
Generic flocculant selection leads to incomplete floc formation, slow settling, and suspended solids carryover that puts your discharge out of spec.
Without dose optimization, most facilities run 20–40% more chemical than needed — increasing both chemical spend and sludge disposal costs.
When your flocculant program isn't matched to your actual water chemistry, TSS and metals limits become a moving target instead of a solved problem.
ChemREADY doesn't sell flocculant off a shelf. We start with your water — test it, characterize it, and run jar tests to identify the exact chemistry that performs best. Then we build a treatment program around it.
Send us a water sample or we'll collect on-site. Our lab runs jar tests across anionic, cationic, and polymer chemistries to find what settles fastest at the lowest dose.
Based on test results, we recommend the flocculant, coagulant, or coag/floc combination matched to your water profile — not a one-size-fits-all product.
We calibrate dosing rates for your flow and load conditions, and help configure feed systems so the program runs efficiently from day one.
Ongoing monitoring and periodic retesting ensure the program stays optimized as your influent changes. We adjust chemistry and dosing — you don't have to.
Send us a sample — or tell us what you're treating — and we'll run the tests. You'll get a recommendation backed by lab data, not a sales pitch.
